Light
Dark
System
Log In
Loading...
Compare / EASA/
Incorporated Amendments
/
Compare & Highlight Differences
CS 29.309 Design limitations
Available versions for ERULES-1963177438-5596
ED Decision 2023/001/R
found in: CS-29 Amdt 11 - Large Rotercraft (Feb 2023)
ED Decision 2003/16/RM
found in: CS-29 Amdt 10 - Large Rotercraft (Jan 2023)
Select original version
...23)
...23)
Original Text
Select changed version
...23)
...23)
Changed text
Removed: 0
Added: 0
Unchanged: 0
Share
CS 29.309 Design limitations ED Decision 2023/001/R The following values and limitations must be established to show compliance with the structural requirements of this Subpart: (a) The design maximum and design minimum weights. (b) The main rotor rpm ranges, power on and power off. (c) The maximum forward speeds for each main rotor rpm within the ranges determined under sub-paragraph (b). (d) The maximum rearward and sideward flight speeds. (e) The centre of gravity limits corresponding to the limitations determined under sub-paragraphs (b), (c) and (d). (f) The rotational speed ratios between each powerplant and each connected rotating component. (g) The positive and negative limit manoeuvring load factors. (h) The maximum and minimum density altitude and temperatures. [Amdt No: 29/11]
CS 29.309 Design limitations ED Decision 2003/16/RM The following values and limitations must be established to show compliance with the structural requirements of this Subpart: (a) The design maximum and design minimum weights. (b) The main rotor rpm ranges, power on and power off. (c) The maximum forward speeds for each main rotor rpm within the ranges determined under sub-paragraph (b). (d) The maximum rearward and sideward flight speeds. (e) The centre of gravity limits corresponding to the limitations determined under sub-paragraphs (b), (c) and (d). (f) The rotational speed ratios between each powerplant and each connected rotating component. (g) The positive and negative limit manoeuvring load factors.