21.A.605 Data requirements

• Regulation (EU) 2019/897 found in: Initial Airworthiness and Environmental Protection (No 748/2012) Part-21 Part-21L (Jul 2024)

21.A.605 Data requirements Regulation (EU) 2019/897 (a)     The applicant shall submit to the Agency the following documents: 1.       a certification programme for the ETSO authorisation, setting out the means to demonstrate compliance with point [21.A.606](#_DxCrossRefBm1649096861)(b); 2.       a statement of compliance certifying that the applicant has met the requirements of this Subpart; 3.       a declaration of design and performance (DDP), stating that the applicant has demonstrated that the article complies with the applicable ETSO in accordance with the certification programme; 4.       a copy of the technical data required in the applicable ETSO; 5.       the exposition, or a reference to the exposition, referred to in point [21.A.143](#_DxCrossRefBm1649097190) for the purpose of obtaining an appropriate production organisation approval under Subpart G or the manual, or a reference to the manual, referred to in point [21.A.125A](#_DxCrossRefBm1649096929)(b) for the purpose of manufacturing under Subpart F without production organisation approval; 6.       for an APU, the handbook, or a reference to the handbook, referred to in point [21.A.243](#_DxCrossRefBm1649097316) for the purpose of obtaining an appropriate design organisation approval under Subpart J; 7.       for all other articles, the procedures, or a reference to the procedures, referred to in point [21.A.602B](#_DxCrossRefBm1649096928)(b)(2); (b)     The applicant shall report to the Agency any difficulty or event encountered during the approval process that may significantly impact the ETSO authorisation.