21.A.602B Demonstration of capability

• Regulation (EU) No 748/2012 found in: Initial Airworthiness and Environmental Protection (No 748/2012) Part-21 Part-21L (Jul 2024)

21.A.602B Demonstration of capability Regulation (EU) No 748/2012 Any applicant for an ETSO authorisation shall demonstrate its capability as follows: (a)     for production, by holding a production organisation approval, issued in accordance with Subpart G, or through compliance with Subpart F procedures; and (b)     for design: 1.       for an Auxiliary Power Unit, by holding a design organisation approval, issued by the Agency in accordance with Subpart J; 2.       for all other articles, by using procedures setting out the specific design practices, resources and sequence of activities necessary to comply with this [Annex I](#_DxCrossRefBm1649096856) (Part 21).