Appendix A to AMC 21.A.15(b) Means of compliance codes

• ED Decision 2019/018/R found in: Initial Airworthiness and Environmental Protection (No 748/2012) Part-21 Part-21L (Jul 2024)

Appendix A to AMC 21.A.15(b) Means of compliance codes ED Decision 2019/018/R <table border="1" cellpadding="0" cellspacing="0" width="604"> <tr> <td valign="top" width="151"> <p><b>Type of compliance </b></p> </td> <td valign="top" width="238"> <p><b>Means of compliance </b></p> </td> <td valign="top" width="215"> <p><b>Associated compliance documents </b></p> </td> </tr> <tr> <td rowspan="4" width="151"> <p>Engineering evaluation </p> </td> <td width="238"> <p>MC0: </p> <p>(a)   compliance statement </p> <p>(b)   reference to design data </p> <p>(c)    election of methods, factors, etc. </p> <p>(d)   definitions</p> </td> <td width="215"> <p>(a) Design data </p> <p>(b) Recorded statements </p> </td> </tr> <tr> <td width="238"> <p>MC1: design review </p> </td> <td width="215"> <p>(c) Descriptions </p> <p>(d) Drawings </p> </td> </tr> <tr> <td width="238"> <p>MC2: calculation/analysis </p> </td> <td width="215"> <p>(e) Substantiation reports </p> </td> </tr> <tr> <td width="238"> <p>MC3: safety assessment </p> </td> <td width="215"> <p>(f)   Safety analysis </p> </td> </tr> <tr> <td rowspan="4" width="151"> <p>Tests </p> </td> <td width="238"> <p>MC4: laboratory tests </p> </td> <td rowspan="4" width="215"> <p>(g) Test programmes </p> <p>(h) Test reports </p> <p>(i)   Test interpretations </p> </td> </tr> <tr> <td width="238"> <p>MC5: ground tests on related product(s) </p> </td> </tr> <tr> <td width="238"> <p>MC6: flight tests </p> </td> </tr> <tr> <td width="238"> <p>MC8: simulation </p> </td> </tr> <tr> <td width="151"> <p>Inspection </p> </td> <td width="238"> <p>MC7: design inspection/audit </p> </td> <td width="215"> <p>(j)   Inspection or audit reports </p> </td> </tr> <tr> <td width="151"> <p>Equipment qualification </p> </td> <td width="238"> <p>MC9: equipment qualification </p> </td> <td width="215"> <p>Note: Equipment qualification is a process that may include all previous means of compliance at equipment level.</p> </td> </tr> </table>