Regulation
(EU) 2019/897
(a) The
applicant shall submit to the Agency the following documents:
1. a certification programme for the ETSO
authorisation, setting out the means to demonstrate compliance with point 21.A.606(b);
2. a statement of compliance certifying that
the applicant has met the requirements of this Subpart;
3. a declaration of design and performance
(DDP), stating that the applicant has demonstrated that the article complies
with the applicable ETSO in accordance with the certification programme;
4. a copy of the technical data required in
the applicable ETSO;
5. the exposition, or a reference to the
exposition, referred to in point 21.A.143 for the purpose of obtaining an
appropriate production organisation approval under Subpart G or the
manual, or a reference to the manual, referred to in point 21.A.125A(b) for the purpose of
manufacturing under Subpart F without production organisation approval;
6. for an APU, the handbook, or a reference
to the handbook, referred to in point 21.A.243 for the purpose of obtaining an
appropriate design organisation approval under Subpart J;
7. for all other articles, the procedures,
or a reference to the procedures, referred to in point 21.A.602B(b)(2);
(b) The applicant shall report to the Agency
any difficulty or event encountered during the approval process that may
significantly impact the ETSO authorisation.
To obtain EASA ETSO authorization, applicants must provide a certification program, compliance statement, design declaration, technical data, and relevant production/design documentation. They must also report any significant issues encountered during the approval process to the Agency. This ensures aviation safety and environmental protection.
* Summary by Aviation.Bot - Always consult the original document for the most accurate information.
Loading collections...