AviationBot
Navigate / EASA / CS E AMDT 5 / SUBPART A - GENERAL /

CS-E 40 Ratings

EASA engine regulations mandate establishing power/thrust ratings like takeoff and maximum continuous for all engines. Additional ratings exist for piston, turbine aeroplanes, and rotorcraft engines, including single-engine inoperative (OEI) power. Ratings consider standard atmospheric conditions and essential accessories. Operating limitations and engine performance must be defined and documented in the engine type certificate data sheet.

Frequently Asked Questions

The Engine's rated Powers/Thrusts and any operating limitations established under CS-E 40 which must be respected by the crew of an aircraft must be listed in the Engine type certificate data sheet specified in 21.A.41.

* Aviation.Bot's Suggestion - Always consult the original regulation for confirmation

Power ratings must be established for Take-off Power and/or Thrust and for Maximum Continuous Power and/or Thrust, for all Engines.

* Aviation.Bot's Suggestion - Always consult the original regulation for confirmation

The OEI power or thrust ratings specified for turbine engines in multi-engined aeroplanes are 2 1/2-Minute OEI Power or Thrust and Continuous OEI Power or Thrust.

* Aviation.Bot's Suggestion - Always consult the original regulation for confirmation

In determining the Engine performance and operating limitations, the overall limits of accuracy of the Engine Control System and of the necessary instrumentation as defined in CS-E 60(b) must be taken into account.

* Aviation.Bot's Suggestion - Always consult the original regulation for confirmation

Other ratings that may be established for piston engines are Maximum Recommended Cruising Power and Maximum Best Economy Cruising Power.

* Aviation.Bot's Suggestion - Always consult the original regulation for confirmation

The Engine Thrust and/or Power ratings will be based on standard atmospheric conditions, with no air bleed for aircraft services and with only those accessories installed which are essential for Engine functioning, including controls, unless otherwise declared in the Engine type certificate data sheet.

* Aviation.Bot's Suggestion - Always consult the original regulation for confirmation

The ratings established under CS-E 40 must be defined for the lowest Power/Thrust that all Engines of the same type may be expected to produce under the conditions used to determine these ratings.

* Aviation.Bot's Suggestion - Always consult the original regulation for confirmation

The OEI power ratings specified for turbine engines in multi-engined rotorcraft are 30-Second OEI Power, 2-Minute OEI Power, 2 1/2-Minute OEI Power, 30-Minute OEI Power, and Continuous OEI Power.

* Aviation.Bot's Suggestion - Always consult the original regulation for confirmation

EASA Logo

CS-E 40  Ratings

ED Decision 2018/014/R

(See AMC E 40)

(a)     Power ratings must be established for Take-off Power and/or Thrust and for Maximum Continuous Power and/or Thrust, for all Engines.

(b)     Other ratings may also be established as -

(1)     Piston Engines -

(i)      Maximum Recommended Cruising Power,

(ii)     Maximum Best Economy Cruising Power;

(2)     Turbine Engines for multi-engined aeroplanes:

(i)      2 1/2-Minute OEI Power or Thrust,

(ii)     Continuous OEI Power or Thrust;

(3)     Turbine Engines for multi-engined rotorcraft (see AMC E 40(b)(3)):

(i)      30-Second OEI Power,

(ii)     2-Minute OEI Power,

(iii)     2 1/2-Minute OEI Power,

(iv)     30-Minute OEI Power,

(v)      Continuous OEI Power;

(4)     Turbine Engines for Rotorcraft:

(i)      30-Minute Power.

(c)      The Engine Thrust and/or Power ratings will be based on standard atmospheric conditions, with no air bleed for aircraft services and with only those accessories installed which are essential for Engine functioning, including controls, unless otherwise declared in the Engine type certificate data sheet.

(d)     Operating limitations appropriate to the intended operating conditions for the Engine must be established (see AMC E 40(d)).

(e)     The Engine’s rated Powers/Thrusts and any operating limitations established under this CS-E 40 which must be respected by the crew of an aircraft must be listed in the Engine type certificate data sheet specified in 21.A.41. The Engine type certificate data sheet must also identify, or make reference to, all other information found necessary for the safe operation of the Engine.

(f)      The ratings established under this CS-E 40 must be defined for the lowest Power/Thrust that all Engines of the same type may be expected to produce under the conditions used to determine these ratings. The minimum testing must be defined, together with associated conditions, necessary for ensuring that the Engines will comply with this objective.

(g)     In determining the Engine performance and operating limitations, the overall limits of accuracy of the Engine Control System and of the necessary instrumentation as defined in CS-E 60(b) must be taken into account.

(h)     For Piston Engines, each declared rating must be defined in terms of the power produced at a given power setting and Engine rotational speed.

[Amdt No: E/1]

[Amdt No: E/5]

Related

AI for Aviation Professionals

Aviation.Bot is an AI tool that assists you with aviation compliance.