ED Decision 2003/16/RM
The following values and limitations must be established to show compliance with the structural requirements of this Subpart:
(a) The design maximum and design minimum weights.
(b) The main rotor rpm ranges, power on and power off.
(c) The maximum forward speeds for each main rotor rpm within the ranges determined under sub-paragraph (b).
(d) The maximum rearward and sideward flight speeds.
(e) The centre of gravity limits corresponding to the limitations determined under sub-paragraphs (b), (c) and (d).
(f) The rotational speed ratios between each powerplant and each connected rotating component.
(g) The positive and negative limit manoeuvring load factors.
Loading collections...