AviationBot
Navigate / EASA / ATCO Licensing and Certification Jun 2024 correction / INITIAL TRAINING CONTENT /

AMC1 ATCO.D.010(a)(2)(i) Composition of initial training - Aerodrome control rating (ADC) training

EASA Air Traffic Controller (ATCO) training requires integrating aircraft performance into air traffic services. Controllers must understand aircraft instruments, wake turbulence, ICAO approach categories, and factors affecting takeoff, climb, and landing. Training includes recognizing aircraft types and using performance data for safe and efficient air traffic control.

Frequently Asked Questions

ED Decision 2023/011/R is applicable from 4 August 2024.

* Aviation.Bot's Suggestion - Always consult the original regulation for confirmation

Learners shall assess and integrate aircraft performance in the provision of ATS.

* Aviation.Bot's Suggestion - Always consult the original regulation for confirmation

Air traffic controllers should integrate consideration of economic factors affecting aircraft, such as starting-up, taxiing, routing, and departure sequence.

* Aviation.Bot's Suggestion - Always consult the original regulation for confirmation

Knowledge of equipment Mode A, Mode C, Mode S, and ADS capability is required.

* Aviation.Bot's Suggestion - Always consult the original regulation for confirmation

Air traffic controllers should appreciate the influence of factors affecting aircraft during climb, such as speed, mass, air density, wind, and temperature.

* Aviation.Bot's Suggestion - Always consult the original regulation for confirmation

Air traffic controllers should appreciate the performance restrictions due to environmental constraints, such as noise-abatement procedures, minimum flight altitudes, and bird strike hazard.

* Aviation.Bot's Suggestion - Always consult the original regulation for confirmation

Air traffic controllers should integrate the influence of factors affecting aircraft on take-off, such as runway conditions, runway slope, aerodrome elevation, wind, temperature, aircraft configuration, airframe contamination, and aircraft mass.

* Aviation.Bot's Suggestion - Always consult the original regulation for confirmation

Air traffic controllers need to explain the wake turbulence effect and associated hazards to succeeding aircraft to prevent hazards.

* Aviation.Bot's Suggestion - Always consult the original regulation for confirmation

EASA Logo

ED Decision 2023/011/R

SUBJECT 6: AIRCRAFT

The subject objective is:

Learners shall assess and integrate aircraft performance in the provision of ATS.

[applicable until 3 August 2024 - ED Decision 2019/023/R]

TOPIC ACFT 1 — AIRCRAFT INSTRUMENTS

Subtopic ACFT 1.1 — Aircraft instruments

ADI (TWR)
ACFT

1.1.1

Integrate information from aircraft instruments provided by the pilot in the provision of ATS.

4

 

ALL

ADI (TWR)
ACFT

1.1.2

Explain the operation of aircraft radio equipment.

2

Optional content: radios (number of), emergency radios

ALL

ADI (TWR)
ACFT

1.1.3

Explain the operation of on-board surveillance equipment.

2

Transponders: equipment Mode A,
Mode C, Mode S, ADS capability

ADI APS ACS

[applicable until 3 August 2024 - ED Decision 2019/023/R]

TOPIC ACFT 1 — AIRCRAFT INSTRUMENTS

Subtopic ACFT 1.1 — Aircraft instruments

ADC
ACFT

1.1.1

Integrate information from aircraft instruments provided by the pilot into the provision of ATS.

4

 

ALL

ADC
ACFT

1.1.2

Explain the operation of aircraft radio equipment.

2

Optional content: radios (number of), emergency radios

ALL

ADC
ACFT

1.1.3

Explain the operation of on-board surveillance equipment.

2

Transponders: equipment Mode A,
Mode C, Mode S, ADS capability

ADC APS ACS

[applicable from 4 August 2024 - ED Decision 2023/011/R]

TOPIC ACFT 2 — AIRCRAFT CATEGORIES

Subtopic ACFT 2.1 — Wake turbulence

ADI (TWR)
ACFT

2.1.1

Explain the wake turbulence effect and associated hazards to succeeding aircraft.

2

ALL

ADI (TWR)
ACFT

2.1.2

Appreciate the techniques used to prevent hazards associated with wake turbulence to succeeding aircraft.

3

ALL

Subtopic ACFT 2.2 — Application of ICAO approach categories

ADI (TWR)
ACFT

2.2.1

Describe the use of ICAO approach categories.

2

ICAO Doc 8168

ADI APP APS

ADI (TWR)
ACFT

2.2.2

Appreciate the effect of ICAO approach categories on the organisation of traffic.

3

ADI APP APS

[applicable until 3 August 2024 - ED Decision 2019/023/R]

TOPIC ACFT 2 — AIRCRAFT CATEGORIES

Subtopic ACFT 2.1 — Wake turbulence

ADC
ACFT

2.1.1

Explain the wake turbulence effect and associated hazards to succeeding aircraft.

2

ALL

ADC
ACFT

2.1.2

Appreciate the techniques used to prevent hazards associated with wake turbulence to succeeding aircraft.

3

ALL

Subtopic ACFT 2.2 — Application of the ICAO approach categories

ADC
ACFT

2.2.1

Describe the use of the ICAO approach categories.

2

ICAO Doc 8168

ADC APP APS

ADC
ACFT

2.2.2

Appreciate the effect of the ICAO approach categories on the traffic organisation.

3

ADC APP APS

[applicable from 4 August 2024 - ED Decision 2023/011/R]

TOPIC ACFT 3 — FACTORS AFFECTING AIRCRAFT PERFORMANCE

Subtopic ACFT 3.1 — Take-off factors

ADI (TWR)
ACFT

3.1.1

Integrate the influence of factors affecting aircraft on take-off.

4

Optional content: runway conditions, runway slope, aerodrome elevation, wind, temperature, aircraft configuration, airframe contamination and aircraft mass

ADV ADI

Subtopic ACFT 3.2 — Climb factors

ADI (TWR)
ACFT

3.2.1

Appreciate the influence of factors affecting aircraft during climb.

3

Optional content: speed, mass, air density, wind and temperature

ADV ADI

Subtopic ACFT 3.3 — Final approach and landing factors

ADI (TWR)
ACFT

3.3.1

Integrate the influence of factors affecting aircraft during final approach and landing.

4

Optional content: wind, aircraft configuration, mass, runway conditions, runway slope, aerodrome elevation

ADV ADI

Subtopic ACFT 3.4 — Economic factors

ADI (TWR)
ACFT

3.4.1

Integrate consideration of economic factors affecting aircraft.

4

Optional content: starting-up, taxiing, routing, departure sequence

ADV ADI

Subtopic ACFT 3.5 — Environmental factors

ADI (TWR)
ACFT

3.5.1

Appreciate the performance restrictions due to environmental constraints.

3

Optional content: noise-abatement procedures, minimum flight altitudes, bird strike hazard

ADV ADI

[applicable until 3 August 2024 - ED Decision 2019/023/R]

TOPIC ACFT 3 — FACTORS AFFECTING AIRCRAFT PERFORMANCE

Subtopic ACFT 3.1 — Take-off factors

ADC
ACFT

3.1.1

Integrate the influence of factors affecting aircraft on take-off.

4

Optional content: runway conditions, runway slope, aerodrome elevation, wind, temperature, aircraft configuration, airframe contamination and aircraft mass

ADC

Subtopic ACFT 3.2 — Climb factors

ADC
ACFT

3.2.1

Appreciate the influence of factors affecting aircraft during climb.

3

Optional content: speed, mass, air density, wind and temperature

ADC

Subtopic ACFT 3.3 — Final approach and landing factors

ADC
ACFT

3.3.1

Integrate the influence of factors affecting aircraft during final approach and landing.

4

Optional content: wind, aircraft configuration, mass, meteorological conditions, runway conditions, runway slope, aerodrome elevation

ADC

Subtopic ACFT 3.4 — Economic factors

ADC
ACFT

3.4.1

Integrate consideration of economic factors affecting aircraft.

4

Optional content: starting-up, taxiing, routing, departure sequence

ADC

Subtopic ACFT 3.5 — Environmental factors

ADC
ACFT

3.5.1

Appreciate the performance restrictions due to environmental constraints.

3

Optional content: noise-abatement procedures, minimum flight altitudes, bird strike hazard

ADC

[applicable from 4 August 2024 - ED Decision 2023/011/R]

TOPIC ACFT 4 — AIRCRAFT DATA

Subtopic ACFT 4.1 — Recognition of aircraft types

ADI (TWR)
ACFT

4.1.1

Characterise a representative sample of aircraft which will be encountered in the operational/working environment.

2

Recognition, ICAO type designators, wake turbulence categories

Optional content: ICAO approach categories

ADI

Subtopic ACFT 4.2 — Performance data

ADI (TWR)
ACFT

4.2.1

Integrate the average performance data of a representative sample of aircraft which will be encountered in the operational/ working environment into the provision of control service.

4

Performance data under a representative variety of circumstances

ADV ADI

[applicable until 3 August 2024 - ED Decision 2019/023/R]

TOPIC ACFT 4 — AIRCRAFT DATA

Subtopic ACFT 4.1 — Recognition of aircraft types

ADC
ACFT

4.1.1

Characterise a representative sample of aircraft which will be encountered in the operational/working environment.

2

Recognition, ICAO type designators, wake turbulence categories

Optional content: ICAO approach categories

ADC

Subtopic ACFT 4.2 — Performance data

ADC
ACFT

4.2.1

Integrate the average performance data of a representative sample of aircraft which will be encountered in the operational/ working environment into the provision of control service.

4

Performance data under a representative variety of circumstances

ALL

[applicable from 4 August 2024 - ED Decision 2023/011/R]

AI for Aviation Professionals

Aviation.Bot is an AI tool that assists you with aviation compliance.