AviationBot
Navigate / EASA / ADDITIONAL AIRWORTHINESS SPECIFICATIONS OCT 2025 / ADDITIONAL AIRWORTHINESS SPECIFICATIONS FOR OPERATIONS / SUBPART A -- GENERAL PROVISIONS / CS 26.1 Purpose and scope /

GM2 26.1 Demonstration of compliance

EASA Logo
GM2 26.1 Demonstration of compliance

ED Decision 2024/010/R

For the initial issue of Part-26, which is a transposition of existing JAR-26 requirements, the operators will be responsible for showing compliance. In most cases this can be done by referring to the certification basis of the aircraft or the approved changes in which the amendment level of the certification specification will indicate compliance. In any case, the JAR-26 requirements should have been implemented already by EU operators and since the CS-26 text is equivalent to the JAR-26 text, compliance with JAR-26 means also compliance with Part-26. See also Article 5 of the Commission Regulation (EU) 2015/640. In the rare case where the above possibilities are not sufficient, showing compliance by the operator directly to the NAA will be difficult. They will need to involve the design approval holder of the aircraft or the approved change as relevant. This design approval holder should then apply to the EASA for certification that the design complies with the relevant CS-26 or CS-25 paragraph, special condition or equivalent safety case. With that approval information the operator can show compliance to the NAA.

[Issue: 26/2]

[Issue: 26/5]

Frequently Asked Questions

For the initial issue of Part-26, operators are responsible for showing compliance. In most cases, this can be done by referring to the certification basis of the aircraft or the approved changes in which the amendment level of the certification specification will indicate compliance. Since CS-26 text is equivalent to JAR-26 text, compliance with JAR-26 also means compliance with Part-26.

* Aviation.Bot's Suggestion - Always consult the original regulation for confirmation

Compliance with JAR-26 implies compliance with Part-26 because the CS-26 text is equivalent to the JAR-26 text, and JAR-26 requirements should have already been implemented by EU operators.

* Aviation.Bot's Suggestion - Always consult the original regulation for confirmation

In such a rare case, showing compliance by the operator directly to the NAA will be difficult. The operator will need to involve the design approval holder of the aircraft or the approved change as relevant. This design approval holder should then apply to EASA for certification that the design complies with the relevant CS-26 or CS-25 paragraph, special condition, or equivalent safety case. With that approval information, the operator can show compliance to the NAA.

* Aviation.Bot's Suggestion - Always consult the original regulation for confirmation

The operators are responsible for showing compliance with Part-26 for the initial issue. In most cases, this can be done by referring to the certification basis of the aircraft or the approved changes, where the amendment level of the certification specification will indicate compliance.

* Aviation.Bot's Suggestion - Always consult the original regulation for confirmation

The design approval holder of the aircraft or the approved change must be involved. The design approval holder should apply to EASA for certification that the design complies with the relevant CS-26 or CS-25 paragraph, special condition, or equivalent safety case. With that approval information, the operator can show compliance to the NAA.

* Aviation.Bot's Suggestion - Always consult the original regulation for confirmation

GM2 26.1 references Article 5 of Commission Regulation (EU) 2015/640.

* Aviation.Bot's Suggestion - Always consult the original regulation for confirmation

The amendment level of the certification specification indicates compliance with Part-26 requirements, as it is part of the certification basis of the aircraft or approved changes that operators can refer to for showing compliance.

* Aviation.Bot's Suggestion - Always consult the original regulation for confirmation

Showing compliance directly to the NAA is difficult in rare cases because the above possibilities (referring to the certification basis or approved changes) are not sufficient, so the operator must involve the design approval holder and obtain EASA certification of design compliance, which is a more complex process.

* Aviation.Bot's Suggestion - Always consult the original regulation for confirmation

AI for Aviation Professionals

Aviation.Bot is an AI tool that assists you with aviation compliance.