AviationBot
Navigate / EASA / ADDITIONAL AIRWORTHINESS SPECIFICATIONS OCT 2025 / ADDITIONAL AIRWORTHINESS SPECIFICATIONS FOR OPERATIONS / SUBPART B -- AEROPLANES / 26.334 Damage tolerance data for STCs and other existing major changes and repairs affecting those STCs or changes approved before 1 September 2003 /

GM1 26.332(c)(ii) and 26.334 FCMS and DTE for STCs and other changes approved prior to 1 September 2003

Design approval holders must respond to requests for FCMS lists and DTI by listing FCMSs, performing DTE, and providing approved documents, with record-keeping and EASA consultation when compliance is unclear.

Frequently Asked Questions

The design approval holder should record the date of receipt of the request, keep records of subsequent communications with the requester, agreements reached, and actions taken (e.g., a copy of the contract to perform the DTE). They should then list the FCMSs, perform a DTE, and make the approved FCMS list and a DTI available to the requester.

* Aviation.Bot's Suggestion - Always consult the original regulation for confirmation

The design approval holder should normally receive such a request by 26 March 2022.

* Aviation.Bot's Suggestion - Always consult the original regulation for confirmation

If no request for a DTI is made prior to 26 February 2023, the design approval holder may assume their support is not required to develop a DTI because the aeroplane is not currently in operation according to Regulation (EU) No 965/2012 Annex IV (Part-CAT).

* Aviation.Bot's Suggestion - Always consult the original regulation for confirmation

No, there is no obligation on the design approval holder to verify whether an operator or continuing airworthiness management organisation has engaged a third party to develop the DTI.

* Aviation.Bot's Suggestion - Always consult the original regulation for confirmation

If the need to comply with point 26.334 is not clear, the design approval holder should highlight this to EASA in the frame of the discussion of the compliance plan required in point 26.331 of Part-26 in order to find a way forward.

* Aviation.Bot's Suggestion - Always consult the original regulation for confirmation

It is not necessary to develop an FCMS list or DT data until a request is received, for example, when an aeroplane is incorporated into a fleet, provided no request for a DTI was made prior to 26 February 2023.

* Aviation.Bot's Suggestion - Always consult the original regulation for confirmation

Design approval holders are recommended to initiate DTE of STCs and other changes as soon as possible if it is considered likely that a request will be made.

* Aviation.Bot's Suggestion - Always consult the original regulation for confirmation

An example of such records would be a copy of the contract to perform the DTE, along with records of subsequent communications, agreements reached, and actions taken.

* Aviation.Bot's Suggestion - Always consult the original regulation for confirmation

EASA Logo
GM1 26.332(c)(ii) and 26.334 FCMS and DTE for STCs and other changes approved prior to 1 September 2003

ED Decision 2024/010/R

The design approval holder should normally receive a request from an operator or an organisation responsible for the management of continuing airworthiness (hereinafter ‘the requester’) for FCMS lists and a DTI by 26 March 2022. The request should result in the design approval holder listing the FCMSs, performing a DTE and making the approved FCMS list and a DTI available to the requester.

Design approval holders are recommended to initiate DTE of STCs and other changes as soon as possible if it is considered likely that a request will be made.

When a request is received, the date of its receipt should be recorded, and a record kept of the subsequent communications with the requester, the agreements reached, and actions taken. An example of such records would be a copy of the contract to perform the DTE.

If no request for a DTI is made prior to 26 February 2023, the design approval holder may assume that their support is not required to develop a DTI because the aeroplane is not currently in operation according to Regulation (EU) No 965/2012 Annex IV (Part‑CAT).

In this case, it is not necessary for the design approval holder to develop an FCMS list or DT data until such a request is received; for example, when an aeroplane is incorporated into a fleet.

Note: It might also be possible that an operator or an organisation responsible for the management of continuing airworthiness has engaged the support of a third party to develop the DTI, but there is no obligation on the design approval holder to verify whether this is the case. If a design approval holder is in a situation where the need to comply with point 26.334 of Part‑26 is not clear, this should be highlighted to EASA in the frame of the discussion of the compliance plan required in point 26.331 of Part‑26 in order to find a way forward.

[Issue: 26/3]

[Issue: 26/5]

AI for Aviation Professionals

Aviation.Bot is an AI tool that assists you with aviation compliance.